Commonly used methods for treating soft soil roadbeds on construction sites

What should I do about loose foundation foundations? For everyone to answer questions and solve problems: 1. composite foundation method: soil mixing piles, powder spray piles, rubble piles, etc.; the disadvantage is that the cost is higher.

Views：37 Post Date：2024-04-06

Strong tamping construction methods and the need for strong tampers

Necessity of development of "Ramming Method" for foundation construction In recent years, due to rapid economic development, the amount of available land has been decreasing year by year, and as long as the ground is being moved, foundation treatment is required, as opposed to the piling process required for high-rise buildings, airports, highways, ports, and other large-scale construction projects that require composite foundation capacity.

Views：30 Post Date：2024-04-06

How to deal with wet trap loess foundations

Commonly used methods to deal with wet subsidence loess foundation are, plain soil pile squeeze dense method, water immersion treatment. It can be selected according to the conditions of foundation wet subsidence type, grade, and requirements of structures.

Views：29 Post Date：2024-04-06

What kind of foundation can not be constructed tamping construction

Rammer construction has a lot of terrain can not use rammer operation, for example: gravel: if it is simple gravel gravel rammer construction is no problem, can be ignored. But if it is a lot of gravel and gravel block is very large, then the first either transport away from the stone, or in situ treatment into a small broken road stone, small gravel can be in the process of ramming construction fully settled. 

Views：33 Post Date：2024-04-06

How to deal with rusty rammers

Ramming foundation construction, ramming machinery and equipment is fundamental, in the process of using the need for maintenance and repair. Rammer foundation construction is a common problem is a strong rammer rust problem, but also need to have appropriate treatment, otherwise about the strong rammer will have a certain impact.

Views：30 Post Date：2024-03-27

Replacement procedure for rammer hammers

The rammer hammer is a commonly used earthwork equipment that compacts the soil and improves the bearing capacity of the foundation. In the process of using ramming hammer, due to long time use and wear, sometimes need to replace the hammer head. The following is a detailed description of the operation steps for strong rammer hammer replacement.

Views：32 Post Date：2024-03-27